With PVC flat frame and PVC side frame. CRC today boats a new production line developed thanks to the great expertise of its team and focused exclusively on the industrial door sector, both hinged and sliding type, for installation on panels and on masonry.

The standard Boxcold door has specific features designed to obtain the highest possible yield. Each door has a leaf with an aluminum perimeter profile, hinges with a ramp and possibility of height/depth adjustment, an outside handle with a key, and an inside handle with emergency push button.
A silicone rubber gasket along the perimeter is designed to allow the use of the door for cold rooms with and without a floor. For doors of thickness 10-12-14 cm (optional for thickness 8 cm), an anti-condensation electric heater along the door clear passage perimeter is supplied by default.

The standard Boxcold door has specific features designed to obtain the highest possible yield. Each door has a leaf with an aluminum perimeter profile, hinges with a ramp and possibility of height/depth adjustment, an outside handle with a key, and an inside handle with emergency push button.
A silicone rubber gasket along the perimeter is designed to allow the use of the door for cold rooms with and without a floor. For doors of thickness 10-12-14 cm (optional for thickness 8 cm), an anti-condensation electric heater along the door clear passage perimeter is supplied by default.

The ZIP rapid roll-up door is the most versatile of the Active range. The mantle is provided with PVC zips, sliding on self-lubricating polyethylene guides, and connects the sheet for the entire height of the door ensuring water tightness and wind resistance (class 3). The ZIP doors are self-repairing up to a width of 4000 mm.

The GLIDE rapid roll-up door is suitable for applications in supermarkets and sales points; is silent and requires little maintenance. Consists of an enclosed mantle and a lower aluminum alloy bar that slides freely in the guides. The lower bar goes back into the guides in the case of accidental impact.

The GLIDE K rapid roll-up door is suitable for applications in supermarkets and sales points; is silent and requires little maintenance. Consists of an enclosed mantle and a lower aluminum alloy bar that slides freely in the guides. The lower bar goes back into the guides in the case of accidental impact. The “K” line features a motor housed inside the winding tube, which allows installation in corridors and any other limited space, and the opening speed is increased to 2.5 m/s.

THE PURA K-IX RAPID ROLL-UP DOOR is characterised by the sheet sliding on grates. Designed to offer the maximum sealing for internal applications in areas where particular environmental and hygiene conditions must be maintained, such as laboratories, pharmaceutical industry buildings, or food handling areas. The “K” line features a motor housed inside the winding tube, which allows installation in corridors and any other limited space, and the opening speed is increased to 2.5 m/s.

The 304 stainless steel structure ensures robustness and strength, even under high-pressure washing.
The PURA K-IX is designed to offer maximum seal, with pressure differences of up to 40 Pascal.
Hermetic seal ensured by:
seal on the upper box to seal the sheet against the thrust of air pressure;
seal on the lower part of the sheet for ground contact;
grate system on the uprights, to prevent from the air going through, in the event of pressure/ depression on the sheet.

The FREEZER rapid roll-up door is characterised by an operating temperature of up to -25°C, with a maximum temperature difference of 30°C between the inside and outside of the cold store room. Suitable for food environments and minimise the release of cold when the storerooms are opened.

The SZ sectional doors are designed to be reliable, long-lasting, and safe. We offer flexible doors that can be adapted to every need and size; we supply high-quality safety and control systems that comply with European standards.

The ZIP K rapid roll-up door is a high-speed ZIP door with a space-saving design. The mantle has PVC zips that slide on self-lubricating polyethylene guides and connect the sheet for the entire height of the door ensuring water tightness and wind resistance (class 3). The “K” line features a motor housed inside the winding tube, which allows
installation in corridors and any other limited space, and the opening speed is increased to 2.5 m/s.

The FOLD-UP door is strong thanks to the folded frame in a 3 mm thick galvanised steel sheet.
The folding system consists of a sheet (PVC-coated fabric) strengthened internally by galvanised steel tubes placed inside welded pockets. The diameter of the strengthening tubes varies according to the resistance class for the required air pressure. The sheet assembly is lifted thanks to belts secured above the winding shaft.

The combination of high-quality raw materials and groundbreaking and cutting-edge productive processes – thanks especially to the latest profiling, pressing, and foaming technological systems – allows us to achieve the best possible production also of standard cold rooms.

CRC cold rooms can be completed and made work perfectly and immediately thanks to a Coldyfor refrigerating unit – saddle or ceiling monoblocks and split units - and internal shelving in aluminum and polyethylene.

Cold room with two separated spaces by a fixed dividing wall with operating temp. -20°C/+2°C.
The former is usually made in thickness 6 cm and 8 cm, with or without floor – that is optional according to the ease of use and cleaning. The latter is made instead in thickness 10-12-14 cm (also in thickness 8 cm with the addition of the door heating cable kit).
Those thicknesses guarantee a better temperature hold below zero, stability ensured by the use of the floor that, for this type of cold room, is mandatory.

CRC cold rooms can easily be installed in every space thanks to their high flexibility and modularity.

Actually, since they are designed for hotels, canteens, big restaurants, and commercial spaces, but also for hospitals, drugstores, and industrial environments, the cold rooms must be adapted to the structures and to the dimensions of the spaces where they must be installed.

For this reason, all Boxcold models can be customized according to the needs.
In the installation space where there are beams, pillars, special walls, and/or corners, Boxcold cold rooms offer the possibility to cover or bypass the obstacle by means of “special” panels (non-standard 20 cm modularity).

The Coldyfor project in fact consists in the design, production and sale of refrigeration units and was born from the need to offer a complete package of "cold room and refrigerating system" to customers/distributors and to do it quickly.

The Coldyfor project in fact consists in the design, production and sale of refrigeration units and was born from the need to offer a complete package of "cold room and refrigerating system" to customers/distributors and to do it quickly.

The Coldyfor project in fact consists in the design, production and sale of refrigeration units and was born from the need to offer a complete package of "cold room and refrigerating system" to customers/distributors and to do it quickly.

Lined and flat surface-type options.
Prepainted galvanized steel, stainless steel or PVC film laminated inner and outer sheet alternatives.
Fire performance according to TS EN 13501-1, B-s2; d0 for PUR insulated cold storage panels, B-s1; d0 for PIR insulated cold storage panels.
Production flexibility at any ordered length between 2m & 12m.
Core thickness options 80-100-120-150-180-200 mm.
According to TS EN 14509, U values range between 0,27 – 0,11 W/m2K depending on the panel thickness.
PUR and PIR insulation alternatives.
ISO, TSE, and CE quality certificates.

Lined and flat surface type options.
Prepainted galvanized steel, stainless steel or PVC film laminated inner and outer sheet alternatives.
Fire performance according to TS EN 13501-1, B-s2; d0 for PUR insulated cold storage panels, B-s1; d0 for PIR insulated cold storage panels.
Production flexibility at any ordered length between 2m & 12m.
Core thickness options 80-100-120-150-180-200 mm.
According to TS EN 14509, U values range between 0,27 – 0,11 W/m2K depending on the panel thickness.
PUR and PIR* insulation alternatives.
ISO, TSE, CE quality certificates and FM Approval Certificates.

• Natural Kraft Paper on the upper and lower surfaces.
• Fire performance according to TS EN 13501-1, B for PUR and PIR insulation board.
• Production flexibility at width 1 m, and any ordered length between 1 m - 3 m.
• Thickness options 50-60-80-100 mm • Compressive strength is 0,095 MPa, according to TS EN 826.
• Usage in roof, wall and floor insulation applications that require high compressive strength.
• Density PUR 38 kg/m3 (+/-2), PIR 40 kg/m3 (+/-2).
• Production at Sakarya factory.